Tag Archives: bronze casting

Garyole

Gargoyle Wing in Wax,  half the mold has been pulled off.

Gargoyle Wing in Wax, half the mold has been pulled off.

Gargoyle Head

Here you see the head on a wax cup,

Wax Gates, are holding the head to the cup.

Its hard to see, but in the back of the head,

there is a wax bar, that runs to the bottom of the cup.

After ceramic shell is built up, it will be fired.

Hung upside down,This will be a vent.

to allow the air to escapeĀ and…

The bronze to flow.

Gargoyle Hand

Hand Has Been Dipped into Slurry,

Then Rolled in Silica Sand,

About three times to get it to this step.

the tubes are inside to help

The slurry dry between coats.

 

 

 

 

 

 

Posted in Work In Progress | Also tagged , , , , Leave a comment